Methods to Follow for Covering Up Asbestos Sample Testing

Importance of Asbestos Sample Testing

If you are in agreement with the concept of safe environment, then you have to look for asbestos presence in the air and try to remove it as soon as the time comes. The worst scenario is that asbestos can enter your surroundings from daily objects, which you make use of. So, keeping a check and control over the asbestos count is what you should be looking for. There are multiple forms of asbestos sample testing services and options available, which you can choose. Depending on the type of asbestos there in the environment, the removal process is going to vary a lot.

It is quite likely that your residential unit will have some amount of asbestos present in some place. A proper inspection by none other than qualified asbestos consultant will help you to identify the potential asbestos-containing materials, which are located inside your house and need to be removed right away. The testing result is enough to provide you with a peace of mind and to ensure if you are surrounded by asbestos or not. If the result is confirmed and you are free from such harmful elements in the air, then that can further reduce the cost of demolition or renovation too.

Air sampling testing for fibers and asbestos

There are some major forms of asbestos sample testing designed for asbestos and fibres. It is mandatory for you to know more about the types of testing methods before you can proceed further with any one of the choices around here.

Phase contrast microscopy: Also known as PCM, this form of sampling testing is mandatory to know more about the presence of asbestos in air and the exact amount of it. This method can help in analyzing asbestos in the air with the help of PCM methodology. Here, the results are primarily reported as fibers per cubic centimetre. It solely depends on the volume of air, used as a sample.

TEM analytical method: Another important type of asbestos sample testing has to be the Interim Transmission Electron Microscopy or the TEM analytical method. Here, the results are primarily reported as structures as per square millimetres and specified for determining the presence of asbestos fibers in the said sample. This kind of procedure is mainly for the Schools K-12 after going through an asbestos abatement project.

Asbestos Sample Testing
Asbestos Sample Testing

Information of bulk building material testing

The current analysis of asbestos presence in bulk building materials is conducted by PLM. This technique is mostly used by the employed for analyzing the bulk building materials. It takes help of the light microscopy technology, which helps in utilizing the current features of the chosen polarized lights for observing mineral based optical properties. This method helps in differentiating asbestos from some of the non-asbestos fibers and can help in classifying different species, which can compose an asbestos family.

This procedure can prove to be a bit of an economical technology, which helps in screening larger sample areas. But, with this method, you might come across some limitations to the current light microscopy testing because of the magnification employed and due to some other interference as available in building material matrix.

Results of the testing:

After you have gone through the asbestos sample testing methodologies, there are mainly three types of asbestos, you might come across. Those are Chrysotile or white asbestos, Crocidolite or blue asbestos and Amosite or brown asbestos. In case, the sample does not comprise of asbestos, then the sign NAD or the No Asbestos Detected will appear on the said result. Unless you have this sign on your test result, it is important to check out for the norms to remove the present ones from the air as soon as possible for a healthier life.

Leave a Reply